 |
2 Bore X 10 Strok
Cissoko
| Quantity: | |
|---|---|
Experience unmatched power and precision with our high-performance Green Hydraulics Welded Double Acting Hydraulic Cylinder with a 2-inch bore and 10-inch stroke with clevis ends and 2500 PSI. This cylinder is an optimal welded-type replacement for the tie rod cylinder. Ideal replacement for farming equipment and various other applications.
Standard size: The center distance from the retracted (closed) pin to the pin is 18.25 inches (26.25 inches when extended), which is strictly different from the ASAE extended version (20.25-inch closing distance) and is designed specifically for conventional non-ASAE agricultural machinery linkage layouts.
Agile and efficient power: The small 2-inch cylinder bore can stably output about 7,854 pounds (about 3.5 tons) of thrust at 2,500 PSI standard agricultural pressure , and requires less oil per action, with extremely fast extension and retraction response and fuel efficiency.
Heavy-duty fully welded frame: It adopts a heavy-duty steel pipe fully welded structure and a 1.125-inch hard chrome plated piston rod, which has excellent resistance to shock, torsion and lateral load, effectively avoiding the deformation risk of traditional tie rod type hydraulic cylinders in bumpy operation.
Standard agricultural leak-proof: Both ends are equipped with 1-inch double clevis retaining pin holes and modern SAE 8 O-ring straight thread (ORB) oil ports , which are highly versatile and completely eliminate micro-leakage under high pressure
SKU | Bore | Stroke | Rod Ø | Retracted | Extended | Pin Ø | Port Size | Column Load | Weight |
|---|---|---|---|---|---|---|---|---|---|
WBC 2x8 | 2 in | 8 in | 1.125 in | 18.25 in | 26.25 in | 1 in | SAE 8 | 7,850 lbs | 15 lbs |
WBC 2x8 ASAE | 2 in | 8 in | 1.125 in | 20.25 in | 28.25 in | 1 in | SAE 8 | 7,850 lbs | 15 lbs |
WBC 2x10 | 2 in | 10 in | 1.125 in | 20.25 in | 30.25 in | 1 in | SAE 8 | 7,850 lbs | 16 lbs |
WBC 2x12 | 2 in | 12 in | 1.125 in | 22.25 in | 34.25 in | 1 in | SAE 8 | 7,850 lbs | 17 lbs |
WBC 2x14 | 2 in | 14 in | 1.125 in | 24.25 in | 38.25 in | 1 in | SAE 8 | 7,850 lbs | 19 lbs |
WBC 2x16 | 2 in | 16 in | 1.125 in | 26.25 in | 42.25 in | 1 in | SAE 8 | 7,850 lbs | 20 lbs |
WBC 2x18 | 2 in | 18 in | 1.125 in | 28.25 in | 46.25 in | 1 in | SAE 8 | 7,850 lbs | 21 lbs |
WBC 2x20 | 2 in | 20 in | 1.125 in | 30.25 in | 50.25 in | 1 in | SAE 8 | 7,850 lbs | 23 lbs |
WBC 2x24 | 2 in | 24 in | 1.125 in | 34.25 in | 58.25 in | 1 in | SAE 8 | 6,950 lbs | 25 lbs |
Applications
Primary Vehicle Applications
Standard Dump Trucks (Class 7 & Class 8): Widely used on 10-wheelers, tri-axle, and quad-axle dump trucks with body lengths ranging from 14 to 18 feet .
Dump Trailers & End Dumps: Installed on medium-sized end dump semi-trailers or heavy-duty pull trailers requiring an aggressive tilt angle to shed stubborn
Pup Trailers: Commonly used on independent dump pup trailers towered behind a standard dump truck to maximize total hauling capacity.
Construction & Aggregates: Lifting heavy loads of gravel, crushed stone, sand, and asphalt on rugged construction sites.
Demolition & Waste Management: Tipping large-volume truck bodies carrying concrete debris, scrap metal, and heavy municipal waste .
Mining & Earthmoving: Operating on site-specific support vehicles hauling heavy soil, overburden, and mineral ores .
Agriculture: Used on specialized agricultural bulk trailers for high-volume dumping of grain, silage, and fertilizers .
2 Bore X 10 Stroke Ag Clevis Hydraulic Cylinders are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
A: According to industry standards, the pin-to-pin center distance of this cylinder when fully retracted (closed) is typically 18.25 inches (approximately 464 mm). When fully extended, the center distance is 26.25 inches (approximately 667 mm). Always measure the closed length of your old cylinder yourself before purchasing a replacement.
A: The key difference lies in the center-closed distance. Buying the wrong one will absolutely prevent you from installing it directly. The standard center-closed distance is 18.25 inches, while the ASAE standard center-closed distance is 20.25 inches (a full 2 inches longer). If your implement bracket is designed according to one of these standards, switching to the other will result in the hydraulic cylinder either being too short to fit or too long, causing the pin holes to misalign.
A: At a standard agricultural hydraulic pressure of 2,500 PSI , it can output approximately 7,854 pounds (about 3.5 tons) of thrust and approximately 5,390 pounds (about 2.4 tons) of pull. This level of power and stroke is a "jack-of-all-trades" in the agricultural field, ideal for balancing the start and stop of small to medium-sized cultivators, seeders, and lawnmowers, as well as tilt adjustment of the rear suspension of small tractors.
A: Never force it in with PTFE tape. SAE 8 ORB is a straight thread, relying on the rubber O-ring on the end face for a hard seal, providing excellent shock resistance and leak prevention. NPT, on the other hand, is a tapered pipe thread that relies on thread deformation combined with PTFE tape for sealing. The pitch and thread type of the two are completely different. Forcing it in will directly damage the hydraulic cylinder port. If your hydraulic pipe is NPT, you must purchase two " SAE 8 external thread to NPT internal thread " hydraulic adapters.
A: No welding tools are required. Although it's called a "fully welded cylinder," its front guide sleeve (Gland) is actually screwed into the cylinder body via threads. If the front oil seal wears and leaks due to long-term exposure to sand or fertilizer, you can easily repair it by simply using a special spanner wrench to unscrew the front threaded cap, pull out the piston rod assembly, and replace it with a new seal kit.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
2 Bore X 10 Stroke Ag Clevis Hydraulic Cylinders are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the Cylinders does not contain hazardous materials.
Factory Testing: Every Cylinders is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
