 |
2 bore x 12 stroke
Cissoko
| Quantity: | |
|---|---|
Cissoko Hydraulic high-performance welded double-acting hydraulic cylinders offer exceptional power and precision, making them an ideal choice for heavy-duty hydraulic applications. Featuring a 2-inch bore and a 12-inch stroke, these cylinders are equipped with clevis-style end mounts and are rated for pressures up to 3,500 PSI. They are widely used across a variety of heavy-duty equipment, including automotive hydraulic systems (such as lifts, dump trucks, trailers, and recovery vehicles), construction machinery (like loaders and bulldozers), agricultural equipment (such as tractors, combine harvesters, and sprayers), forestry machinery (including feller-bunchers and skidders), and mining equipment (such as drill rigs and haul trucks).
High-pressure durability : Rated operating pressure up to 3000 PSI , made with high-strength microalloyed steel tubing and cast steel lug base, designed specifically for heavy-duty industrial and agricultural machinery.
Excellent corrosion resistance and lifespan : The piston rod is precision ground, polished and hard chrome plated , which can effectively reduce frictional resistance, prevent scratches and extend the life of the seals.
Easy-to-maintain design : Equipped with a threaded screw-in cylinder head (Gland Cap) , it can be easily disassembled without special clamping tools when the seal needs to be replaced or maintenance is required.
Long stroke load capacity : While meeting the requirements of 18" long stroke operation, it combines heavy-duty cast steel lugs to have excellent lateral load resistance and high cost performance.
SKU | Bore | Stroke | Rod Ø | Retracted | Extended | Pin Ø | Port Size | Column Load | Weight |
|---|---|---|---|---|---|---|---|---|---|
WCL 2x4 | 2 in | 4 in | 1.25 in | 14.25 in | 18.25 in | 1 in | SAE 8 | 9,400 lbs | 16 lbs |
WCL 2x6 | 2 in | 6 in | 1.25 in | 16.25 in | 22.25 in | 1 in | SAE 8 | 9,400 lbs | 17 lbs |
WCL 2x8 | 2 in | 8 in | 1.25 in | 18.25 in | 26.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x8 ASAE | 2 in | 8 in | 1.25 in | 20.25 in | 28.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x10 | 2 in | 10 in | 1.25 in | 20.25 in | 30.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x12 | 2 in | 12 in | 1.25 in | 22.25 in | 34.25 in | 1 in | SAE 8 | 9,400 lbs | 21 lbs |
WCL 2x14 | 2 in | 14 in | 1.25 in | 24.25 in | 38.25 in | 1 in | SAE 8 | 9,400 lbs | 23 lbs |
WCL 2x16 | 2 in | 16 in | 1.25 in | 26.25 in | 42.25 in | 1 in | SAE 8 | 9,400 lbs | 25 lbs |
WCL 2x18 | 2 in | 18 in | 1.25 in | 28.25 in | 46.25 in | 1 in | SAE 8 | 9,400 lbs | 25 lbs |
WCL 2x20 | 2 in | 20 in | 1.25 in | 30.25 in | 50.25 in | 1 in | SAE 8 | 9,400 lbs | 26 lbs |
WCL 2x24 | 2 in | 24 in | 1.25 in | 34.25 in | 58.25 in | 1 in | SAE 8 | 7,700 lbs | 30 lbs |
WCL 2x30 | 2 in | 30 in | 1.25 in | 40.25 in | 70.25 in | 1 in | SAE 8 | 5,300 lbs | 34 lbs |
WCL 2x36 | 2 in | 36 in | 1.25 in | 46.25 in | 82.25 in | 1 in | SAE 8 | 3,900 lbs | 39 lbs |
Applications
Primary Vehicle Applications
Standard Dump Trucks (Class 7 & Class 8): Widely used on 10-wheelers, tri-axle, and quad-axle dump trucks with body lengths ranging from 14 to 18 feet .
Dump Trailers & End Dumps: Installed on medium-sized end dump semi-trailers or heavy-duty pull trailers requiring an aggressive tilt angle to shed stubborn
Pup Trailers: Commonly used on independent dump pup trailers towered behind a standard dump truck to maximize total hauling capacity.
Construction & Aggregates: Lifting heavy loads of gravel, crushed stone, sand, and asphalt on rugged construction sites.
Demolition & Waste Management: Tipping large-volume truck bodies carrying concrete debris, scrap metal, and heavy municipal waste .
Mining & Earthmoving: Operating on site-specific support vehicles hauling heavy soil, overburden, and mineral ores .
Agriculture: Used on specialized agricultural bulk trailers for high-volume dumping of grain, silage, and fertilizers .
2 bore x 12 stroke clevis hydraulic cylinders are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
The cross-sectional area of a 2-inch cylinder is approximately 3.14 square inches .
At 2500 PSI pressure, the maximum thrust is approximately 7,850 pounds (about 3.56 tons) .
Under heavy-duty system pressures of 3,000 PSI to 3,500 PSI , the maximum thrust can reach 9,400 to 10,990 pounds (approximately 4.2 to 5 tons) .
Pin-to-pin retracted distance : typically 22.25 inches (approximately 56.5 cm) .
Pin-to-Pin Extended : 22.25" + 12" travel = 34.25 inches (approximately 87 cm) .
Pin Diameter : The standard is usually 1.0 inch , with galvanized steel pins.
2-inch bore lug cylinders are typically equipped with SAE 8 (i.e., 3/4"-16 UNF straight thread O-ring interface) or SAE 6 (9/16"-18 UNF) interfaces, and some models may also have 3/8" NPT tapered pipe threads.
When purchasing hydraulic hoses, please be sure to check the type of oil port thread on the cylinder body first to avoid buying the wrong adapter fitting, which may cause oil leakage.
Agricultural machinery : tractor bucket control, suspended implement adjustment, small bulldozer blade.
Construction and engineering machinery : mini excavator attachments, mini dump trailer tipping aids, mini scissor lifts or booms.
Forestry and Logistics : Simple log splitter, small lifting platform and automated push-pull device.
Many welded or rod-type hydraulic cylinders have threaded lugs at the rod end . During installation, you can fine-tune the angle of this lug to ensure that the pin holes at both ends are on the same plane, thus preventing the cylinder from experiencing torsional stress during extension and retraction.
After adjustment, be sure to tighten the lock nut to prevent the earrings from loosening or falling off during frequent reciprocating operation.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
2 bore x 12 stroke clevis hydraulic cylinders are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the Cylinders does not contain hazardous materials.
Factory Testing: Every Cylinders is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
