 |
4 bore x 24 stroke
Cissoko
| Quantity: | |
|---|---|
Experience unmatched power and precision with our high-performance Magister Hydraulics Welded Double Acting Hydraulic Cylinder with a 4-inch bore and 24-inch stroke with clevis ends and 2500 PSI. This cylinder is an optimal welded-type replacement for the tie rod cylinder. Ideal replacement for farming equipment and various other applications.
High load capacity: Welded steel clevis ends, ⌀ 4.5″ honed cold-drawn tubing, ⌀ 1.5″ chrome-plated rod (steel 1045), and top-quality piston seals make it capable of handling heavy loads with a 24″ stroke.
Agricultural Equipment: Ideal for tractors, harvesters, and other farming machinery, ensuring reliable operation in tough conditions.
Double-Acting Functionality: Provides controlled power in both directions, ensuring efficient and versatile performance for a variety of applications.
High-Quality Construction: Steel piston and steel gland with wear rings, crafted from premium-grade materials, offering exceptional durability, corrosion resistance, and long-lasting service life.
Precision Engineering: Designed with tight tolerances and advanced sealing technology to minimize leakage and maintain optimal performance.
Smooth Operation: Features finely honed cylinder barrels and high-quality seals for smooth and consistent operation.
Easy Maintenance: Simple to service and maintain, reducing downtime and ensuring continuous operation.
SKU | Bore | Stroke | Rod Ø | Retracted | Extended | Pin Ø | Port Size | Column Load | Weight |
|---|---|---|---|---|---|---|---|---|---|
WBC 4x8 | 4 in | 8 in | 1.5 in | 18.25 in | 26.25 in | 1 in | SAE 8 | 31,400 lbs | 37 lbs |
WBC 4x8 ASAE | 4 in | 8 in | 1.5 in | 20.25 in | 28.25 in | 1 in | SAE 8 | 31,400 lbs | 38 lbs |
WBC 4x10 | 4 in | 10 in | 1.5 in | 20.25 in | 30.25 in | 1 in | SAE 8 | 31,400 lbs | 39 lbs |
WBC 4x12 | 4 in | 12 in | 1.5 in | 22.25 in | 34.25 in | 1 in | SAE 8 | 31,400 lbs | 42 lbs |
WBC 4x14 | 4 in | 14 in | 1.5 in | 24.25 in | 38.25 in | 1 in | SAE 8 | 31,400 lbs | 45 lbs |
WBC 4x16 | 4 in | 16 in | 1.5 in | 26.25 in | 42.25 in | 1 in | SAE 8 | 28,200 lbs | 48 lbs |
WBC 4x18 | 4 in | 18 in | 1.5 in | 28.25 in | 46.25 in | 1 in | SAE 8 | 25,300 lbs | 50 lbs |
WBC 4x20 | 4 in | 20 in | 1.5 in | 30.25 in | 50.25 in | 1 in | SAE 8 | 22,600 lbs | 52 lbs |
WBC 4x24 | 4 in | 24 in | 1.5 in | 34.25 in | 58.25 in | 1 in | SAE 8 | 16,800 lbs | 59 lbs |
Applications
Primary Vehicle Applications
Standard Dump Trucks (Class 7 & Class 8): Widely used on 10-wheelers, tri-axle, and quad-axle dump trucks with body lengths ranging from 14 to 18 feet .
Dump Trailers & End Dumps: Installed on medium-sized end dump semi-trailers or heavy-duty pull trailers requiring an aggressive tilt angle to shed stubborn
Pup Trailers: Commonly used on independent dump pup trailers towered behind a standard dump truck to maximize total hauling capacity.
Construction & Aggregates: Lifting heavy loads of gravel, crushed stone, sand, and asphalt on rugged construction sites.
Demolition & Waste Management: Tipping large-volume truck bodies carrying concrete debris, scrap metal, and heavy municipal waste .
Mining & Earthmoving: Operating on site-specific support vehicles hauling heavy soil, overburden, and mineral ores .
Agriculture: Used on specialized agricultural bulk trailers for high-volume dumping of grain, silage, and fertilizers .
4 Bore × 24 Stroke Ag Clevis Hydraulic Cylinders are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Its standard retracted length is 34.25 inches (approximately 870 mm).
The extended length is 58.25 inches (approximately 1480 mm).
Note the total external length: 34.25 inches is only the distance between the center of the pin. Due to the thickness of the clevis castings at both ends, the total physical length of the entire cylinder when closed is approximately 36.5 inches (about 927 mm). The total external length of the clevis at both ends must be taken into account when planning installation space, mechanical folding dead angles, or stroke limits.
Although a 4-inch bore cylinder can theoretically generate 31,416 pounds (about 14.2 tons) of thrust at 2,500 PSI pressure , the total span of the cylinder is close to 1.5 meters when fully extended due to the 24-inch stroke.
If a standard 1.5-inch piston rod is used to withstand an axial load exceeding 16,800 pounds (approximately 7.6 tons), even a slight lateral vibration or non-absolute axial force will cause the piston rod to instantly become unstable and bend laterally, like a thin bamboo pole. Therefore, models equipped with a 1.5-inch piston rod must not be used under full load thrust when fully extended .
With a larger piston rod cross-sectional area, its bending resistance increases exponentially. The 4x24 heavy-duty model equipped with a 2.0-inch thick rod has a fully extended ultimate rod load (bending limit) that soars to 36,000 pounds (approximately 16.3 tons) .
Even when pushed to its full stroke at 2500 ~ 3000 PSI, it can still maintain excellent safety rigidity and is extremely difficult to bend in most heavy-duty working environments with multiple off-center loads and impacts.
A single 4x24 hydraulic cylinder, when fully extended in one direction, requires the removal of 4.94 liters (5.22 quarts) of hydraulic oil. Many small and medium-sized tractors have hydraulic oil tanks with a total capacity of only 10-15 liters.
If your equipment uses dual-cylinder coordinated lifting (such as a self-unloading cargo box lift), the extension of both cylinders will instantly drain nearly 10 liters of oil! This will cause the main unit's oil tank to run dry, the hydraulic pump to suck in air and make a whistling sound, eventually burning out. Before installation, you must replenish the hydraulic oil in the main unit and ensure that the oil level in the tank remains above the safety line after extension.
Taking the 2.0-inch thick rod version as an example, because the thick piston rod occupies a huge amount of internal space in the recovery chamber (rod chamber), the total amount of oil required when the cylinder retracts is much less than the amount of oil required when it extends.
When the hydraulic pump provides a constant flow rate (GPM), the cylinder retracts (retracts) much faster than it extends (extends) . When operating a multi-way valve, the retraction action must be much gentler than usual to prevent a violent mechanical end impact caused by a rapid rebound during a long stroke.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
4 Bore × 24 Stroke Ag Clevis Hydraulic Cylinders are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the Cylinders does not contain hazardous materials.
Factory Testing: Every Cylinders is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
