 |
GLFDN
cissoko
| Quantity: | |
|---|---|
The GLFDN series is a high-capacity, heavy-duty Group-3 rotary gear-type hydraulic flow divider composed of multiple large-displacement gear sections mechanically keyed onto a heavy-duty common internal shaft. This positive-displacement design splits a single high-flow pump inlet stream into multiple independent output flows. By forcing all internal gear segments to rotate at the exact same speed, it provides highly precise and robust fluid synchronization among multiple large downstream cylinders or high-power hydraulic motors, especially under severe asymmetric or shifting workload resistance
High-Flow Positive Displacement: Driven entirely by the fluid energy of the incoming pressurized oil. Because the flow splitting accuracy is governed strictly by the precise geometry of the heavy-duty gear teeth, it is fundamentally immune to fluctuations in oil viscosity, temperature, or massive load imbalances.
Reinforced High-Tensile Housing: Built with a high-strength cast iron housing designed specifically to withstand the extreme structural stresses, high torque transfers, and intense internal separating forces generated during high-flow, high-pressure operations.
Massive Pressure Intensification Capability: Acts as a localized hydraulic pressure booster. If one downstream line experiences zero resistance (e.g., a cylinder finishes its stroke early), its mechanical energy is transmitted through the central shaft to help the remaining heavily loaded sections, raising its output pressure beyond the primary pump's relief valve threshold.
Integrated Heavy-Duty Re-phasing Valves: Can be configured with large-capacity end-of-stroke re-phasing relief valves and anti-cavitation check valves. This automatically bleeds air, re-aligns massive cylinders when they bottom out, and protects hoses from extreme vacuum damage.
| Parameter | Range / Value | Metric & US Units | Notes |
|---|---|---|---|
| Displacement per Section | 22.0 ~ 90.0 | cc/rev (cm³/rev) | Group-3 large displacement size, specially designed for heavy-duty high-flow hydraulic synchronization systems. |
| Flow Capacity per Section | 50 ~ 200 | L/min (approx. 13 ~ 53 US gpm) | Wide allowable flow rate for single input/output channel. Low flow resistance design for continuous heavy-duty operation. |
| Max. Continuous Pressure | 240 | bar (approx. 3480 psi) | Cast iron housing provides ultra-high structural rigidity to prevent valve body deformation under high pressure. |
| Max. Intermittent Pressure | 280 | bar (approx. 4060 psi) | Maximum peak pressure permitted during instantaneous shifting, braking or short shock load of large construction machinery. |
| Synchronization Accuracy | ±1.5% ~ ±2.0% | Percentage error range | Rigid heavy mechanical shaft synchronization, maintains extremely high accuracy even under high flow and heavy load conditions. |
| Number of Sections | 2 ~ 4 | Sections / Channels | Standard configuration: 2 or 4 sections. Heavy-duty sectional assembly structure supports multi-section customization. |
| Typical Pressure Drop | 12 ~ 18 | bar (approx. 174 ~ 260 psi) | Hydraulic pressure drop required to drive large-size gear rotation; heat dissipation shall be considered in large system design. |
| Fluid Temp. Range | -20 ~ 80 | °C (-4°F to 176°F) | Operating condition with standard NBR rubber seals. FPM fluororubber seals are recommended for large high-heat systems. |
Applications
Multi-Cylinder Lifting Systems
Synchronizes synchronous hoists, large industrial platform lifts, and hydraulic scissor lift tables.
Powers vehicle lifting platforms and maintenance jacks in automotive service bays.
Controls heavy gate/dam leveling and stage lifting mechanisms in construction and theater engineering.
Agricultural & Forestry Attachments
Synchronizes the fold-in and fold-out wings of heavy-duty cultivators, seeders, and wide field sprayers.
Operates the simultaneous clamping claws of forestry log grabbers and large tree harvesters.
Controls the parallel movement of levelers and crop feeding beds in combine harvesters.
Industrial Processing & Manufacturing Machinery
Drives the parallel compression cylinders on large hydraulic presses, trash compactors, and metal balers.
Controls the precise alignment of molding plates, heavy scrap shears, and automated material clamping jigs.
Synchronizes multi-point positioning fixtures in automated production lines.
Multi-Motor Hydrostatic Drives
Distributes oil equally to multiple hydraulic wheel motors on small wheeled vehicles or specialized field equipment to prevent wheel spinning (acting as a hydraulic differential lock).
Synchronizes parallel conveyor belt drives or dual blending paddles in chemical and aggregate processing.
GLFDN Motors are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
GLFDN Motor are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the motor does not contain hazardous materials.
Factory Testing: Every Motor is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
