 |
HZ80
cissoko
| Quantity: | |
|---|---|
The HZ80 is an 80-liter square steel hydraulic oil tank . Primarily targeting the truck, trailer, and construction machinery markets, this tank is a core component of mobile hydraulic wet kits. It is typically mounted on the side-mount of a vehicle chassis via its accompanying heavy-duty bracket and is used to store, cool, and purify hydraulic oil for medium-duty hydraulic systems.
Heavy-duty steel structure with excellent impact resistance : The tank is manufactured by integral welding of high-thickness heavy-duty steel plates, which has extremely strong torsional and compressive resistance. In harsh environments such as construction sites, sand and gravel plants, or mines, it can effectively resist the impact of flying stones and mechanical collisions, and is less prone to dents, deformation, or cracking than aluminum or plastic fuel tanks .
Wear-resistant high-gloss black coating, strong chassis protection : The exterior undergoes a strict anti-rust baking paint process (gloss black), which is not only beautiful, but also can resist the corrosion of road salt spray, mud and water and weak acid and alkali chemicals for a long time, extending the overall service life of the chassis fuel tank .
Space-optimized design for highly flexible installation : Dimensions are 550mm (depth) × 400mm (length) × 450mm (height) . The square geometry, only 40cm long, greatly frees up chassis space, making it ideal for compact, space-saving installations in mid-sized trucks with tight wheelbases and narrow chassis.
Integrated liquid level sight glass for intuitive and safe inspection : The front panel features a glass sight glass with clearly visible oil level markings. Drivers or fleet maintenance personnel can easily see the oil level and color without opening the cover, preventing low hydraulic oil levels from causing the pump to cavitate or burn out.
Supports continuous heavy-duty operation : As a steel oil tank, its wall thickness is uniform and its heat dissipation is stable. There is no time limit for a single operation , making it perfectly suitable for medium-sized mobile hydraulic operations that require long-term continuous operation.
| Parameter | Specification |
|---|---|
| Rated Capacity | 80 liters (approximately 21 gallons) |
| Box Shape | Compact square design (Square / Rectangular) |
| Physical Dimensions | 550mm (D) × 400mm (L) × 450mm (H) |
| Box Material | Heavy-duty steel construction with rust-resistant glossy black paint finish |
| Oil Port Configuration | Reserve two 1-1/4" BSPT standard threaded internal interfaces |
| Included Components | Includes heavy-duty beam mounting bracket, fastening steel straps, and dust cap with protective filter |
Applications
Small and medium-sized dump trucks : Hydraulic lifting cylinders used to drive the rapid lifting and lowering of the truck bed.
Road clearing vehicles and medium-sized trailers : flatbed tilting, telescopic and hydraulic winch systems for high-frequency operation.
Mobile agricultural and forestry machinery : hydraulic power source oil storage for mobile timber cranes and special forestry equipment.
Industrial mobile power unit : serving as an independent oil reservoir for small to medium-sized mobile hydraulic power packs.
HZ80 Tanks are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : Its biggest advantage is its extremely strong resistance to mechanical impact . The steel tank is very robust and can effectively withstand the violent impact of flying rocks and accidental mechanical collisions in harsh environments such as construction sites, mines, or gravel roads, and is not easily dented or cracked. In addition, it has no limitation on the single working time and can operate continuously for a long time, which is more reliable in terms of heavy-duty heat dissipation and durability than polyethylene plastic tanks.
Answer : The 40 cm (400 mm) length is an optimized size specifically designed for medium-duty trucks with limited chassis space. It ensures a practical 80-liter capacity by increasing the depth (550 mm) and height (450 mm) . For small and medium-sized dump trucks, road clearing trailers, or medium-sized hydraulic truck-mounted cranes, the 80-liter volume fully meets the circulation and storage needs of their hydraulic systems, representing a balance between "compact size and ample capacity."
Answer : No need to worry. The outer wall of the fuel tank undergoes a rigorous industrial-grade high-gloss black spray paint/baking process before leaving the factory . As long as this protective paint layer does not suffer severe scratches or expose the primer, it can effectively prevent corrosion from road salt spray, mud, and daily rainwater for a long time. During routine maintenance, if you find any scratches caused by flying stones, simply apply a rust-preventive touch-up paint pen.
Answer : BSPT stands for British Standard Pipe Thread (tapered thread) . When connecting hydraulic hoses or fittings, a male thread fitting of the same 1-1/4" BSPT specification must be used. Because it is a tapered thread, it has a self-sealing tendency when tightened, but to ensure absolutely no leakage under high pressure and strong vibration, it must be used in conjunction with hydraulic thread sealant (such as Loctite 567) or high-quality Teflon tape during installation .
Answer : The heavy-duty frame bracket and steel belt that come with the truck are standard universal truck kits, suitable for most standard I-beam frames. However, when actually installing them onto the side of the truck chassis, it is usually necessary to drill and calibrate the existing holes in the truck frame or fuel tank bracket according to the existing holes in your truck frame , and then use high-strength bolts for fixing to ensure driving safety when carrying 80 liters of hydraulic oil (approximately 160 kg or more).
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
Tanks are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the tank does not contain hazardous materials.
Factory Testing: Every tanks is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
