 |
TG
cissoko
| Quantity: | |
|---|---|
The Muncie Power Products TG Series Power Take-Off (PTO) is the most versatile and widely used double-gear mechanical power take-off in the work truck industry. Introduced in 1982, this "workhorse" family utilizes a multi-gear configuration featuring a constant mesh input gear. The input gear runs constantly with the transmission to protect components from shifting engagement errors and gear clashing.
Die-Cast Aluminum Housing: Significantly reduces total powertrain weight and operational noise while delivering excellent heat dissipation and structural impact strength.
Modular Through-Gear Design: Operators can switch this single PTO assembly between completely different transmission models by changing only one gear. It allows speed modifications by swapping out just two gears without needing a new body.
Unmatched Component Configuration: Built to configure into over 250,000 distinct assembly combinations. It fits dozens of manual and automatic gearboxes from major truck manufacturers.
Rotatable Output Pump Flanges: Offers 19 available output shaft options, including 15 separate multi-position hydraulic pump flanges. This design lets body builders rotate the pump body to clear tight exhaust and suspension obstacles.
Extra Large Shift Cover Access: The side shift housing cutout is enlarged, allowing technicians to directly insert a dial indicator tool to easily check and set exact backlash clearances during setup
| Speed Ratio | Intermittent Power @ 1,000 RPM (HP) | Intermittent Torque (lb-ft) | Continuous Torque (lb-ft) | Intermittent Power @ 1,000 RPM (kW) | Intermittent Torque (Nm) | Continuous Torque (Nm) |
|---|---|---|---|---|---|---|
| 04 | 54 | 285 | 200 | 40 | 386 | 270 |
| 05 | 51 | 270 | 189 | 38 | 366 | 256 |
| 06 | 47 | 245 | 172 | 35 | 332 | 232 |
| 07 | 44 | 230 | 161 | 33 | 312 | 218 |
| 08 | 44 | 230 | 161 | 33 | 312 | 218 |
| 09 | 39 | 205 | 144 | 29 | 278 | 195 |
| 12H | 40 | 210 | 147 | 30 | 284 | 199 |
| 13H | 40 | 210 | 147 | 30 | 284 | 199 |
| 15H | 37 | 195 | 137 | 28 | 264 | 185 |
| 18H | 33 | 175 | 123 | 25 | 237 | 166 |
Applications
Fire and Rescue Vehicles : Provides immediate, high-horsepower engagement under load to drive high-volume water pumps and aerial ladders.
Dump Trucks & Trailers : Operates the large hydraulic cylinders needed to raise and lower heavy dump beds quickly and safely.
Cranes & Boom Trucks : Supplies smooth, continuous hydraulic flow for precise control of telescopic booms and outriggers.
Vacuum & Sewer Cleaner Trucks : Runs high-capacity vacuum pumps and high-pressure water jetters for municipal and industrial cleanup.
Fuel & Chemical Tankers : Drives product pumps to safely offload bulk liquids and hazardous materials.
TG PTO are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Unmatched shift options: It offers 13 distinct actuation layouts to fit any vocational cabin setup.
Common variants: The options include standard Manual Air, Cable shift, Electric/Air, Hydraulic, and specialized constant-mesh setups.
Flange patterns: It accommodates multiple standard direct-mount patterns, including SAE "A", SAE "B" 2- & 4-bolt, and SAE "B" special flanges.
Greaseable upgrades: Three of the premium direct-mount pump options feature externally greaseable shafts. This allows technicians to lubricate spline faces without detaching the hydraulic pump.
Stationary engagement only: Standard mechanical slider shift variants (Air or Cable) require the vehicle to be completely stopped before engagement.
Procedure requirement: The driver must set the parking brake, drop the transmission to neutral or press the clutch pedal, and let engine revs idle before hitting the PTO toggle.
Overtightening or uneven torque: The aluminum casing can warp if the fasteners are overtightened past specifications.
Torque tracking: The 6-bolt mounting screws must be tensioned to 40–45 ft. lbs., while 8-bolt studs must track strictly to 50–55 ft. lbs.. Always use the manufacturer-specified cross-over pattern.
Backlash deviation: Gear noises right after installation indicate that the gear mesh gap is set incorrectly.
The fixes: A high-pitched whine means the mesh is too tight, requiring you to stop the engine and add a shimming gasket. A loud clatter means the mount is loose, requiring you to remove a shimming gasket to seat the gears deeper.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
TG PTO are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the pump does not contain hazardous materials.
Factory Testing: Every PTO is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
