 |
EWN 10000
cissoko
| Quantity: | |
|---|---|
The Runva EWN 10000 is a highly specialized, heavy-duty commercial electric winch engineered for heavy vehicle recovery trailers, utility flatbeds, car carriers, and large 4x4 overland rigs. Unlike standard powersports or recreational 4WD winches, the EWN series prioritizes a narrower, deeply recessed chassis layout paired with reinforced external anchoring structures, allowing it to deliver exceptionally stable, continuous pulling force under grueling industrial conditions.
Commercial-Spec Compact Footprint: The EWN 10000 utilizes a unique short-drum chassis design, resulting in a narrower overall footprint. This allows the winch to be installed into highly restricted spaces, such as between structural rails on tow-truck beds or inside tightly recessed custom commercial bumpers.
Industrial-Grade Braking Safety: Equipped with an automatic screw cone brake sitting at the end of the gear train. It applies physical friction-locking pressure that mechanically intensifies as load resistance increases, preventing dangerous rollbacks during steep trailer ramp loading. [1]
Failsafe Sliding Ring Clutch: Instead of using basic friction dials, the internal spline rings physically lock together when engaged. This completely eliminates the risk of the winch accidentally popping out of gear mid-pull.
Dual-Voltage Industrial Integration: Available in 12V and 24V variants, making it perfectly compatible with recreational 4x4 battery banks as well as dual-battery industrial electrical grids on commercial flatbeds or military transport equipment
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 10,000 lb (4,536 kg) |
| Motor Type | Series-Wound Motor |
| 12 V Motor Rating | Input: 4.6 kW / 6.1 HP; Output: 2.1 kW / 2.8 HP |
| 24 V Motor Rating | Input: 6.5 kW / 8.7 HP; Output: 2.8 kW / 3.8 HP |
| Brake | Automatic Screw-Cone Brake |
| Geartrain | 3-Stage Planetary Steel Gear |
| Gear Reduction Ratio | 332:1 |
| Clutch | Full-Spooling Clutch |
| Cable Size (Diameter × Length) | Ø3/8 in × 85.3 ft (Ø9.2 mm × 26 m) |
| Drum Size (Diameter × Length) | Ø2.8 in × 8.6 in (Ø72 mm × 219 mm) |
| Mounting Bolt Pattern | 10 in × 4.5 in (254 mm × 114.3 mm), 4 × M12 |
| Net Weight | 128.5 lb (58.3 kg) |
Applications
1. Full-Size 4x4 Off-Road Touring & Self-Recovery
Extreme Terrain Extraction: Pulls full-size four-wheel-drive vehicles, overland rigs, and heavily laden touring wagons out of deep mud bogs, thick sand dunes, clay tracks, and rock ruts.
Steep Incline Navigation: Assists mid-to-large 4WDs in ascending or descending near-vertical rocky slopes and mountain trails safely by acting as a mechanical anchor control.
Lightning-Fast Stage Recovery: Used heavily by professional off-road competition crews who choose the low-ratio EWB9500-Q variant for near-instant winch recoveries to minimize time lost during timed race stages.
Continuous Heavy Load Pulls: Engineered specifically for high-frequency winching environments where typical recreational winches overheat or melt synthetic lines.
Flatbed Vehicle Hauling: Mounts onto heavy-duty car carrier trailers and commercial tow truck beds to pull non-running passenger cars, luxury SUVs, and light commercial vehicles up steep loading ramps.
Industrial Site Dragging: Assists construction and utility crews in dragging heavy industrial equipment, concrete molds, or malfunctioning machinery into position on workspace lots.
Tree and Stump Clearing: Utilized on rural properties and farms to pull down hazardous trees, pull stubborn tree roots out of fields, or drag large fallen logs off roads.
Stranded Equipment Rescue: Rescues bogged farm machinery, small utility tractors, or livestock transport trailers stuck in rain-soaked paddocks.
EWN 10000 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer: It is primarily built for commercial car-hauling trailers, tilt-tray tow trucks, flatbed recovery vehicles, and heavy agricultural loading. It is also favored by off-roaders who need a high-capacity winch but have limited lateral space inside custom custom-fabricated bumper bars.
Answer: Generally, no. Most standard 4x4 bull bars are pre-drilled for the universal 10.0" x 4.5" pattern. The EWN 10000 uses a narrower 6.54" x 4.5" (166mm x 114.3mm) mounting bolt pattern. To install it in a standard bull bar, you will need a specialized conversion mounting plate or custom-drilled anchoring points.
Answer: At full 10,000 lbs capacity, the 12V motor draws a heavy 350+ Amps. To prevent voltage drops and solenoid damage, it is highly recommended to run this winch with a heavy-duty dual battery setup or a commercial battery rated for at least 850+ CCA. Always keep the vehicle's engine idling during a pull. [1, 2]
Answer: Yes. While it ships factory standard with a heavy-duty waterproof wired handheld controller, the integrated control box architecture is fully wireless remote control compatible. You can easily integrate a Runva wireless relay transmitter kit into the control loop.
Answer: Yes, the drum accommodates synthetic rope line upgrades. However, because the screw cone brake can transfer heat during continuous commercial pulls, ensure the first layer of your new synthetic line features a high-heat resistant protection sleeve, and remember to replace the steel roller fairlead with a smooth aluminum hawse fairlead.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
EWN 10000 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
