 |
EWX 12000
cissoko
| Quantity: | |
|---|---|
The Runva EWX 12000 is a highly popular, commercial-grade heavy-duty electric winch engineered for full-size 4x4 trucks, heavy SUV overlanding rigs, and commercial vehicle trailers. Positioned as a premier high-capacity model within Runva's efficiency-focused EWX line, it balances an impressive 12,000 lbs single-line pulling capacity with an optimized full-steel drivetrain to deliver dependable crawling leverage and stable power management during grueling, long-duration extractions.
Maximum Low-End Crawling Leverage: The massive 430:1 gear reduction ratio enables the winch to continuously pull extreme loads without bogging down or stalling. This makes it a preferred option for rescuing heavily loaded commercial chassis and military transport.
Convenient and Specially Designed Chassis: Built with a specially designed shape for convenience of installation and good looking. This configuration maximizes fitment layout inside tight commercial flatbed chassis or recessed custom bumper spaces.
Industrial-Grade Braking Safety: Equipped with an automatic screw cone load-holding brake mechanism. It mechanically tightens its grip as line tension increases, ensuring zero slip when holding heavy assets mid-ramp.
Dual-Voltage Systems: Available in 12V and 24V configurations, making it fully adaptable to full-size recreational 4x4 dual-battery setups as well as heavy industrial fleet vehicles.
Comprehensive Control Kit: Packages ship factory-equipped with a heavy-duty handheld controller alongside a convenient wireless remote control, letting operators handle recoveries from a safe distance.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 12,000 lb (5,443 kg) |
| Motor Type | Series-Wound Motor |
| 12 V Motor Rating | Input: 5.4 kW / 7.2 HP; Output: 2.7 kW / 3.6 HP |
| 24 V Motor Rating | Input: 5.3 kW / 7.1 HP; Output: 3.3 kW / 4.4 HP |
| Brake | Automatic Screw-Cone Brake |
| Geartrain | 3-Stage Planetary Steel Gear |
| Gear Reduction Ratio | 230:1 |
| Clutch | Sliding Geared-Ring Clutch |
| Cable Size (Diameter × Length) | Ø13/32 in × 83.7 ft (Ø10.2 mm × 25.5 m) |
| Drum Size (Diameter × Length) | Ø2.48 in × 8.8 in (Ø63 mm × 223 mm) |
| Mounting Bolt Pattern | 10 in × 4.5 in (254 mm × 114.3 mm), 4 × M10 |
| Net Weight | 92.6 lb (42.0 kg) |
Applications
1. Full-Size 4x4 Off-Road Touring & Self-Recovery
Extreme Terrain Extraction: Pulls full-size four-wheel-drive vehicles, overland rigs, and heavily laden touring wagons out of deep mud bogs, thick sand dunes, clay tracks, and rock ruts.
Steep Incline Navigation: Assists mid-to-large 4WDs in ascending or descending near-vertical rocky slopes and mountain trails safely by acting as a mechanical anchor control.
Lightning-Fast Stage Recovery: Used heavily by professional off-road competition crews who choose the low-ratio EWB9500-Q variant for near-instant winch recoveries to minimize time lost during timed race stages.
Continuous Heavy Load Pulls: Engineered specifically for high-frequency winching environments where typical recreational winches overheat or melt synthetic lines.
Flatbed Vehicle Hauling: Mounts onto heavy-duty car carrier trailers and commercial tow truck beds to pull non-running passenger cars, luxury SUVs, and light commercial vehicles up steep loading ramps.
Industrial Site Dragging: Assists construction and utility crews in dragging heavy industrial equipment, concrete molds, or malfunctioning machinery into position on workspace lots.
Tree and Stump Clearing: Utilized on rural properties and farms to pull down hazardous trees, pull stubborn tree roots out of fields, or drag large fallen logs off roads.
Stranded Equipment Rescue: Rescues bogged farm machinery, small utility tractors, or livestock transport trailers stuck in rain-soaked paddocks.
EWX 12000 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer: It is perfectly tailored for heavy full-size 4x4 vehicles (e.g., Toyota LandCruiser, Nissan Patrol, Ford F-150/F-250), heavily equipped overland touring wagons, and car carrier trailers. The 12,000 lbs rating ensures an excellent safety margin for vehicles heavily laden with steel bars, rooftop tents, tools, and supplies.
Answer: Yes. It utilizes the industry-standard 10.0" x 4.5" (254mm x 114.3mm) mounting bolt pattern, matching the pre-drilled plates of most commercial bull bars. Because its overall frame layout is tightly packaged, it fits easily into standard bumper cavities.
Answer: At full capacity, the 12V motor draws a heavy 400+ Amps. To prevent severe voltage drops and protect the internal solenoids, it is highly recommended to run this winch with a heavy-duty dual battery setup or a commercial battery rated for at least 850+ CCA. Always keep your engine idling during recovery.
Answer: Yes. While standard packages feature a heavy-duty waterproof wired handheld controller, the integrated control pack architecture is fully wireless remote control compatible. You can easily integrate an aftermarket Runva wireless receiver kit into the circuit.
Answer: Yes, the drum handles synthetic rope upgrades perfectly. However, because the internal screw cone brake transfers friction heat to the drum during extended pulls, you must ensure the new synthetic rope has a high-heat resistant protection sleeve on its first layer and replace the steel roller fairlead with a smooth aluminum hawse fairlead.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
EWX 12000 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
