 |
HWH 080I
cissoko
| Quantity: | |
|---|---|
The Runva HWH 080I is an industrial-spec, heavy-duty hydraulic recovery winch meticulously engineered for commercial tow trucks, road recovery wreckers, multi-car carriers, and industrial salvage flatbeds. As a variation within Runva's heavy-duty 8-Ton lineup, the letter "I" typically signifies Internal Components optimization or Industrial Integration enhancements (such as an internal mechanical brake configuration or an specialized industrial-mount control housing). Driven entirely by auxiliary hydraulic fluid pressure rather than electrical motors, it delivers a massive 8-Ton (8,000 kg) rated pulling force built to endure continuous, grueling commercial extractions without fading.
Advanced Cool-Drum Ratchet Brake : Moving the mechanical ratchet brake entirely inside the gearbox housing isolates all frictional braking heat away from the line path. It provides a permanent hold without standard brake pad wear and fully protects synthetic lines from melting during grueling extractions.
Ultra-Compact Bumper Fitment : The EWV series is intentionally engineered with a shortened, lightweight layout. This compact design allows it to drop directly into a vast majority of restrictive 4x4 winch bars and bull bars without structural cutting.
Rugged All-Steel Internals : Built without plastic or structural composite components; the all-steel gear train resists teeth-stripping and structural housing warping under sudden, heavy trail load shocks.
Flexible Control Kit : Packages come factory standard with a weather-sealed control module, a heavy-duty wired handheld pendant remote, and a convenient wireless remote control for safe clearance operation.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 17,637 lb (8,000 kg) |
| Hydraulic Motor Displacement | 125 ml/rev |
| Oil Flow | 15–50 L/min |
| Working Pressure | 15 MPa |
| Brake | Wet-Type Hydraulic Brake |
| Geartrain | 2-Stage Planetary Alloy Gear |
| Gear Reduction Ratio | 38:1 |
| Waterproof Rating | IP54 |
| Cable Size (Diameter × Length) | Ø9/16 in × 105 ft (Ø14 mm × 32 m) |
| Drum Size (Diameter × Length) | Ø5.7 in × 10.8 in (Ø144 mm × 275 mm) |
| Mounting Bolt Pattern | 15.7 in × 8.7 in × 4.7 in (400 mm × 220 mm × 120 mm), 8 × M14 |
| Net Weight | 304.2 lb (138 kg) |
Applications
Service Truck Lifting : Mounts directly onto custom davit cranes or articulating crane arms on field service mechanics' trucks to lift heavy engine blocks, transmissions, and industrial pumps.
Tool and Equipment Loading : Installed on utility truck beds to effortlessly hoist heavy weld packs, gas cylinders, and tooling boxes from the ground up onto the vehicle platform.
Overhead Gantry Systems : Affixes to overhead I-beam trolleys or fixed gantry frames to hoist heavy machinery parts, steel fabrications, and raw materials over assembly lines.
Vehicle Maintenance Lifting : Utilized in automotive or heavy equipment workshops to suspend or precisely position unyielding sub-frames and assemblies during repairs.
Watercraft Hoisting : Integrated into dockside davits or small marina cranes to vertically lift jet skis, tender boats, and outboard motors out of the water for dry storage or servicing.
Marine Cargo Handling : Handles loading and unloading operations on utility vessels and cargo docks where a fully sealed, weather-resistant hoisting unit is required.
Heavy Farm Rigging : Mounts inside barns or specialized tractor attachments to safely suspend heavy farm implements, cutter decks, or tractor components for routine blade sharpening or structural maintenance.
Game and Timber Processing : Used on rural work yards to lift large timber logs onto processing benches or hoist large game carcasses onto cleaning racks.
HWH 080I winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : The HWH 080I is designed explicitly for heavy road recovery wreckers, commercial tow trucks, tilt-tray car carriers, and specialized military or agricultural salvage flatbeds . With an 8-ton single-line pulling capacity, it safely hauls deadweight passenger buses, commercial delivery trucks, and heavy tractors onto transport beds.
Answer : No. Unlike lighter HWD models, an industrial 8-ton winch requires a rated fluid pressure of 15 MPa and an oil flow up to 50 L/min . Standard consumer light-truck power steering grids cannot provide this volume. It must be plumbed into a dedicated PTO (Power Take-Off) hydraulic system or an auxiliary high-output commercial pump loop.
Answer : Operating at its maximum rated fluid flow of 50 L/min, the winch manages a highly controlled, stable working speed of approximately 13.1 ft/min (4.0 m/min) . In industrial recovery, a deliberate and unyielding crawling speed is prioritized over rapid velocity to ensure maximum operator safety and prevent violent load shifting.
Answer : No. The maximum 17,637 lbs (8,000 kg) capacity applies strictly to the first layer of cable winding directly around the bare metal drum. As the thick 14mm steel wire rope wraps into secondary and tertiary layers, the effective drum diameter increases, which naturally drops mechanical pulling leverage.
Answer : While technically possible, it is highly discouraged for industrial flatbed and wrecker operations . Dragging heavy, sharp, or damaged metal vehicle chassis onto flatbeds can easily fray, pinch, or slice synthetic strands. The factory-supplied 14mm galvanized steel aircraft cable is the industry standard for handling abrasive commercial wear.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
HWH 080I winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
