 |
2.5 Bore X 12 Stroke
Cissoko
| Quantity: | |
|---|---|
Experience unmatched power and precision with our high-performance Cissoko Hydraulics Welded Double Acting Hydraulic Cylinder with a 2.5-inch bore and 12-inch stroke with clevis ends and 3500 PSI. This cylinder is a best option for heavy-duty hydraulics. Perfect fit to automotive hydraulic applications (vehicle lifts, dump trucks, towing and recovery), construction equipment (loaders, bulldozers), agricultural machinery (tractors, combine harvesters, sprayers), forestry (tree harvesters, skidders), and mining equipment (drilling rigs, haul trucks).
High-pressure durability : Rated operating pressure up to 3000 PSI , made with high-strength microalloyed steel tubing and cast steel lug base, designed specifically for heavy-duty industrial and agricultural machinery.
Excellent corrosion resistance and lifespan : The piston rod is precision ground, polished and hard chrome plated , which can effectively reduce frictional resistance, prevent scratches and extend the life of the seals.
Easy-to-maintain design : Equipped with a threaded screw-in cylinder head (Gland Cap) , it can be easily disassembled without special clamping tools when the seal needs to be replaced or maintenance is required.
Long stroke load capacity : While meeting the requirements of 18" long stroke operation, it combines heavy-duty cast steel lugs to have excellent lateral load resistance and high cost performance.
SKU | Bore | Stroke | Rod Ø | Retracted | Extended | Pin Ø | Port Size | Column Load | Weight |
|---|---|---|---|---|---|---|---|---|---|
WCL 2x4 | 2 in | 4 in | 1.25 in | 14.25 in | 18.25 in | 1 in | SAE 8 | 9,400 lbs | 16 lbs |
WCL 2x6 | 2 in | 6 in | 1.25 in | 16.25 in | 22.25 in | 1 in | SAE 8 | 9,400 lbs | 17 lbs |
WCL 2x8 | 2 in | 8 in | 1.25 in | 18.25 in | 26.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x8 ASAE | 2 in | 8 in | 1.25 in | 20.25 in | 28.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x10 | 2 in | 10 in | 1.25 in | 20.25 in | 30.25 in | 1 in | SAE 8 | 9,400 lbs | 19 lbs |
WCL 2x12 | 2 in | 12 in | 1.25 in | 22.25 in | 34.25 in | 1 in | SAE 8 | 9,400 lbs | 21 lbs |
WCL 2x14 | 2 in | 14 in | 1.25 in | 24.25 in | 38.25 in | 1 in | SAE 8 | 9,400 lbs | 23 lbs |
WCL 2x16 | 2 in | 16 in | 1.25 in | 26.25 in | 42.25 in | 1 in | SAE 8 | 9,400 lbs | 25 lbs |
WCL 2x18 | 2 in | 18 in | 1.25 in | 28.25 in | 46.25 in | 1 in | SAE 8 | 9,400 lbs | 25 lbs |
WCL 2x20 | 2 in | 20 in | 1.25 in | 30.25 in | 50.25 in | 1 in | SAE 8 | 9,400 lbs | 26 lbs |
WCL 2x24 | 2 in | 24 in | 1.25 in | 34.25 in | 58.25 in | 1 in | SAE 8 | 7,700 lbs | 30 lbs |
WCL 2x30 | 2 in | 30 in | 1.25 in | 40.25 in | 70.25 in | 1 in | SAE 8 | 5,300 lbs | 34 lbs |
WCL 2x36 | 2 in | 36 in | 1.25 in | 46.25 in | 82.25 in | 1 in | SAE 8 | 3,900 lbs | 39 lbs |
Applications
Primary Vehicle Applications
Standard Dump Trucks (Class 7 & Class 8): Widely used on 10-wheelers, tri-axle, and quad-axle dump trucks with body lengths ranging from 14 to 18 feet .
Dump Trailers & End Dumps: Installed on medium-sized end dump semi-trailers or heavy-duty pull trailers requiring an aggressive tilt angle to shed stubborn
Pup Trailers: Commonly used on independent dump pup trailers towered behind a standard dump truck to maximize total hauling capacity.
Construction & Aggregates: Lifting heavy loads of gravel, crushed stone, sand, and asphalt on rugged construction sites.
Demolition & Waste Management: Tipping large-volume truck bodies carrying concrete debris, scrap metal, and heavy municipal waste .
Mining & Earthmoving: Operating on site-specific support vehicles hauling heavy soil, overburden, and mineral ores .
Agriculture: Used on specialized agricultural bulk trailers for high-volume dumping of grain, silage, and fertilizers .
2.5 Bore X 12 Stroke Clevis Hydraulic Cylinders are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
The cross-sectional area of a 2.5-inch cylinder is approximately 4.91 square inches .
At 2500 PSI pressure, the maximum thrust is approximately 12,270 pounds (about 5.56 tons) .
At 3000 PSI pressure, the maximum thrust is approximately 14,730 pounds (about 6.68 tons) .
In a 3500 PSI (such as heavy-duty welded type) high-pressure system, the maximum thrust can reach 17,185 pounds (approximately 7.79 tons) .
Standard universal type : The closed length is typically 22.25 inches (the total extended length is 34.25 inches). This size is used for most common tie-rod and welded hydraulic cylinders.
ASAE Standard Implement : The closed length is typically 24.25 inches (36.25 inches total length extended). This is designed specifically for certain U.S. standard agricultural machinery, allowing for more internal space.
Recommendation : Before purchasing, you must measure the pin hole distance of the old hydraulic cylinder. Blindly purchasing may result in installation failure.
Thicker piston rod (1.25") : provides greater resistance to bending (column load capacity) and is safer under high pressure or complex conditions with lateral horizontal thrust.
Effect on pulling force : The thicker the piston rod, the smaller the effective area when the cylinder retracts (pulls back). Therefore, the pulling force of a 1.25" rod will be slightly less than that of a 1.125" rod, but the retraction speed will be slightly faster.
Heavy agricultural implements : three-point suspension adjustment for medium and large tractors, round balers, and medium-sized reversible plows.
Industry and Construction : Dump truck/cargo box tipping, mini loader bucket lifting.
Forestry and Logistics : Push plate control for heavy-duty log splitters (Log Splitter), hydraulic lifting platform.
Keep the dust seal and piston rod clean : After each shutdown or operation in a dusty environment, clean the dirt and debris from the piston rod to prevent it from wearing down the seal when it retracts.
Apply grease regularly : The pin holes of the clevises usually have grease fittings, which should be greased regularly to prevent dry friction between metal from causing deformation of the pins and holes.
Check hydraulic oil quality : Regularly check if the oil has turned black or contains metal shavings. Dirty oil entering the cylinder will directly scratch the inner wall of the cylinder, leading to internal leaks and premature cylinder failure.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
2.5 Bore X 12 Stroke Clevis Hydraulic Cylinders are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the Cylinders does not contain hazardous materials.
Factory Testing: Every Cylinders is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
