 |
SSH2 & SSV2/4
cissoko
| Quantity: | |
|---|---|
The Muncie Power Products SSH2 & SSV2/4 Series Power Take-Off (PTO) is a line of ultra-heavy-duty, split-shaft power take-offs. Manufactured by Interpump Hydraulics, these units are inserted directly into the main vehicle driveshaft between the transmission and the rear axle. They are engineered for massive industrial vehicles when auxiliary power requirements far exceed the mechanical capacity of standard transmission-mounted PTOs
Complete Isolation Drive Profile: When the split-shaft system is pneumatically engaged, it fully disconnects the main transmission drive from the rear wheels. 100% of the engine’s raw horsepower and torque is routed exclusively to the auxiliary equipment.
Up to Four Independent Outputs: The unit can provide multiple separate auxiliary outputs (configured to point toward the front or rear of the vehicle). This allows a single truck engine to drive high-pressure water pumps, hydraulic pumps, and mechanical blowers simultaneously.
Quiet Precision Ground Gearing: Constructed with wide, shaved helical gears to minimize high-frequency mechanical vibrations and significantly dampen planetary gear whine under massive continuous loads.
Clutch-Shift Disengagement Option: Can be customized with specialized internal friction packs. This allows secondary output shafts to be cycled on and off independently without stopping the vehicle’s main engine or other primary fluid components.
| Metric Parameter | Value / Range | Imperial Parameter | Value / Range |
|---|---|---|---|
| Maximum Main-Shaft Through Torque | 19,524–29,286 Nm | Maximum Main-Shaft Through Torque | 14,400–21,600 lb-ft |
| Maximum PTO Output Torque per Shaft | 1,162–1,274 Nm | Maximum PTO Output Torque per Shaft | 857–940 lb-ft @ 1,500 RPM |
| Maximum Drive Power | 170 kW @ 1,000 RPM | Maximum Intermittent Power | 228 HP @ 1,000 RPM |
| Maximum Standard Output Speed | 2,500 RPM | Maximum Base Output Speed | 2,500 RPM |
| Maximum Speed with Forced-Lubrication Kit | 3,700 RPM | Maximum Speed with Lubrication Kit | 3,700 RPM |
| Internal Output Ratio (SSH2/SSV2) | 1.28:1, Overspeed Output | Internal Output Ratio (SSH2/SSV2) | 1.28:1, Overspeed Drive |
| Internal Output Ratio (SSV4) | 1.56:1, Overspeed Output | Internal Output Ratio (SSV4) | 1.56:1 |
| Engagement Type | Air-Shift / Optional Clutch-Shift | Engagement Type | Air-Shift / Optional Clutch-Shift |
Applications
Fire and Rescue Vehicles : Provides immediate, high-horsepower engagement under load to drive high-volume water pumps and aerial ladders.
Dump Trucks & Trailers : Operates the large hydraulic cylinders needed to raise and lower heavy dump beds quickly and safely.
Cranes & Boom Trucks : Supplies smooth, continuous hydraulic flow for precise control of telescopic booms and outriggers.
Vacuum & Sewer Cleaner Trucks : Runs high-capacity vacuum pumps and high-pressure water jetters for municipal and industrial cleanup.
Fuel & Chemical Tankers : Drives product pumps to safely offload bulk liquids and hazardous materials.
SSH2 & SSV2/4 PTO are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Output count limitations: The SSV2 provides up to four auxiliary drive stations (two main outputs plus two secondary light-duty lube/chemical pump stations) with a 1.28:1 ratio.
High-torque single loop: The SSV4 focuses purely on two extra heavy-duty output stations (one front, one rear) with a much higher 1.56:1 internal overspeed drive ratio.
Driveline main inputs: The main through-shaft accepts massive heavy-duty vehicle flanges including 1550, 1600, 1700, and 1800 Series drivelines.
Auxiliary pump interfaces: Natively supports direct-mount hydraulic pumps via standard SAE "B", "B-B", "C", "C-C", and "D" flanges, or 1410/1500 Series companion yoke shafts.
Stationary focus: Split-shaft setups are designed primarily for stationary work cycles where the rear axle is completely dead.
Mobile drive capability: However, because the system allows the rear axle drive connection to remain independent, specific models can be configured to provide auxiliary power while the vehicle is slowly creeping.
Thermal dissipation ceiling: In standard setups, the inner gears are splash-lubricated, limiting the output speed to 2,500 RPM.
Continuous high speed: If your equipment requires extended operational cycles above 2,500 RPM (up to 3,700 RPM), a forced oil pump and external cooling circuit are mandatory to prevent gear seizure.
Brute force vocations: Because they manage massive continuous inputs, they are the industry standard for high-capacity applications.
Common vehicle chassis: Widely installed on Class 8 sewer vacuum combo trucks, heavy industrial fire pumpers, concrete pumper booms, oilfield fracturing rigs, and large wood-chipping vocational equipment.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
SSH2 & SSV2/4 PTO are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the pump does not contain hazardous materials.
Factory Testing: Every PTO is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
