 |
EWN 12000
cissoko
| Quantity: | |
|---|---|
The Runva EWN 12000 is a commercial-grade, high-capacity electric winch engineered for heavy vehicle recovery trailers, utility flatbeds, commercial tow trucks, and full-size 4x4 overland transport vehicles . As a flagship heavy-duty model within the EWN Series, it pairs an impressive 12,000 lbs single-line pull with an ultra-deep 332:1 gear reduction ratio, delivering maximum torque and steady mechanical crawling power in high-load industrial recovery setups.
Massive Low-End Pulling Leverage: The combination of a high-output 7.2 HP motor and a deep 332:1 gear reduction ratio provides unmatched mechanical force. It easily breaks the intense suction of thick mud or clay for heavy commercial trucks .
Specially Designed Footprint: Features Runva's specially designed chassis shape for convenient installation [https://www.runva.com/product/ewn-12000/]. It streamlines the setup inside restricted commercial bumper recesses or within narrow flatbed mounting brackets .
Industrial-Grade Braking Safety: Equipped with an automatic screw cone brake sitting at the end of the gear train It applies strong physical friction-locking pressure that mechanically intensifies as load resistance increases.
Dual-Voltage Systems: Available in 12V and 24V configurations, making it fully adaptable to full-size recreational 4x4 dual-battery setups as well as heavy industrial fleet vehicles.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 12,000 lb (5,443 kg) |
| Motor Type | Series-Wound Motor |
| 12 V Motor Rating | Input: 5.4 kW / 7.2 HP; Output: 2.7 kW / 3.6 HP |
| 24 V Motor Rating | Input: 5.3 kW / 7.1 HP; Output: 3.3 kW / 4.4 HP |
| Brake | Automatic Screw-Cone Brake |
| Geartrain | 3-Stage Planetary Steel Gear |
| Gear Reduction Ratio | 332:1 |
| Clutch | Full-Spooling Clutch |
| Cable Size (Diameter × Length) | Ø13/32 in × 83.7 ft (Ø10.2 mm × 25.5 m) |
| Drum Size (Diameter × Length) | Ø2.8 in × 8.6 in (Ø72 mm × 219 mm) |
| Mounting Bolt Pattern | 10 in × 4.5 in (254 mm × 114.3 mm), 4 × M12 |
| Net Weight | 132.3 lb (61 kg) |
Applications
1. Full-Size 4x4 Off-Road Touring & Self-Recovery
Extreme Terrain Extraction: Pulls full-size four-wheel-drive vehicles, overland rigs, and heavily laden touring wagons out of deep mud bogs, thick sand dunes, clay tracks, and rock ruts.
Steep Incline Navigation: Assists mid-to-large 4WDs in ascending or descending near-vertical rocky slopes and mountain trails safely by acting as a mechanical anchor control.
Lightning-Fast Stage Recovery: Used heavily by professional off-road competition crews who choose the low-ratio EWB9500-Q variant for near-instant winch recoveries to minimize time lost during timed race stages.
Continuous Heavy Load Pulls: Engineered specifically for high-frequency winching environments where typical recreational winches overheat or melt synthetic lines.
Flatbed Vehicle Hauling: Mounts onto heavy-duty car carrier trailers and commercial tow truck beds to pull non-running passenger cars, luxury SUVs, and light commercial vehicles up steep loading ramps.
Industrial Site Dragging: Assists construction and utility crews in dragging heavy industrial equipment, concrete molds, or malfunctioning machinery into position on workspace lots.
Tree and Stump Clearing: Utilized on rural properties and farms to pull down hazardous trees, pull stubborn tree roots out of fields, or drag large fallen logs off roads.
Stranded Equipment Rescue: Rescues bogged farm machinery, small utility tractors, or livestock transport trailers stuck in rain-soaked paddocks.
EWN 12000 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer: It is primarily built for commercial flatbed tow trucks, car carrier trailers, heavy machinery transport beds, and fully equipped full-size 4x4 overland vehicles. It trades top line velocity for extreme pulling torque, making it a reliable choice for commercial fleet recovery.
Answer: Because it utilizes an ultra-deep 332:1 gear ratio for heavy mechanical advantage, the line speed is more deliberate and controlled. It clocks a steady 15.7 ft/min (4.8 m/min) at zero load and drops down to roughly 5.29 ft/min (1.8 m/min) under its full 12,000 lbs load . This ensures a safe, highly manageable pulling rate during critical recoveries.
Answer: At a full 12,000 lbs load, the 12V motor draws approximately 310 Amps [https://www.runva.com/product/ewn-12000/]. To prevent unexpected voltage drops, you should power this winch with a heavy-duty dual battery system or a commercial battery rated for at least 850+ CCA. Always keep the vehicle's engine running at an elevated idle while operating the winch.
Answer: It ships standard with a heavy-duty wired control box and handle switch, but the integrated electrical relay housing is fully wireless remote control available . You can seamlessly connect a Runva wireless transmitter kit into the circuit for remote asset retrieval .
Answer: Yes. The drum accommodates synthetic rope line upgrades [https://www.runva.com/product/ewn-12000/]. However, because the automatic screw cone brake can transfer friction heat to the drum during extended industrial pulls, you must ensure the new synthetic rope has a high-heat resistant protection sleeve on its first layer and replace the steel roller fairlead with a smooth aluminum hawse fairlead [https://www.runva.com/product/ewn-12000/].
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
EWN 12000 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
