 |
50-Gal-Saddle-Mount-Aluminum-Hydraulic-Tank
cissoko
| Quantity: | |
|---|---|
This is a 50-gallon (approximately 189 liters) cylindrical aluminum side-mounted hydraulic tank . As a core fuel storage component of wet kits for heavy-duty trucks and semi-trailer tractors , it is directly mounted to the side-mount of the truck chassis via a heavy-duty J-bracket and stainless steel straps . Its cylindrical shape perfectly matches and integrates with original equipment diesel tanks on commercial vehicles.
Key advantages : Aluminum alloy has excellent thermal conductivity, and with its side-mounted, wind-facing position, the system has high heat dissipation efficiency, supporting continuous operation without single-run time limitations ; the tank weighs only about 32 pounds (about 14.5 kg), 100% rust-proof, eliminating the source of rust contamination of hydraulic oil .
Industrial visual matching : Adopting a standard 24-inch diameter cylindrical design , it is mounted on the side of the beam and can be perfectly symmetrical and integrated with the original aluminum alloy diesel tank of the truck in terms of shape and texture.
Features : Dual display for oil level and temperature on the outer wall ; Built-in fully welded anti-surge baffle and return oil defoaming diffuser Comes with a J-type heavy-duty bracket and stainless steel fastening straps
| Parameter | Specification |
|---|---|
| Rated Capacity | 50 Gallons / Approx. 189 Liters |
| Standard Physical Dimensions | 24 inches in diameter × 27 inches in length (approximately 610mm × 686mm) |
| Fuel Tank Net Weight | Approximately 32 lbs (14.5 kg); complete heavy-duty side mount and stainless steel straps approximately 44 lbs |
| Surface Treatment Process | High-polish/bright rolled aluminum (Bright Mill Finish) |
| Mainstream Oil Port Configuration | Features a standard 1-1/4" NPT or 2" NPT machining interface, available in bottom or back configurations |
| Filtering and Filling Components | 40-micron air-breathing cap with stainless steel filter, anti-theft chain, and long nylon mesh basket |
Applications
Core matching mechanism : With the excellent thermal conductivity of aluminum alloy and side-mounted air cooling, it supports continuous heavy-duty operation without any time limit for a single run , and can perfectly prevent hydraulic oil overheating.
Main application conditions :
Dump trucks and side-tipping semi-trailers : The box weighs only 32 pounds (approximately 14.5 kg) , significantly reducing the overall vehicle weight and increasing the legal load capacity.
Mobile sliding bottom and bulk feed truck : Easily handles continuous high-pressure loading and unloading operations lasting 20-40 minutes at a time.
Liquid chemical tank truck : Utilizing the 100% rust-proof and corrosion-resistant properties of aluminum, it ensures that no rust will peel off inside the tank under high salt spray conditions, thereby protecting the precision valve assembly .
Highway clearing vehicles and truck-mounted cranes : When the space behind the cab is occupied by the crane boom base, it is the only solution for side-mounting.
Conversely, the following scenarios are prohibited : Because aluminum alloy has a lower impact resistance than carbon steel, it is strictly prohibited from being used in harsh off-road mining environments with dense rocks and a high risk of violent chassis impacts. For such conditions, steel side-mounted boxes must be used.
Tanks are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : Its core advantages lie in superior heat dissipation during continuous operation and flexible chassis space utilization. The cylindrical fuel tank is mounted sideways next to the truck's frame, allowing for extensive natural air cooling over a large area while the vehicle is in motion. This results in extremely high heat exchange efficiency, making it ideal for high-frequency, long-term continuous hydraulic operations [Saddle Mount Tanks - Muncie Power Products]. Furthermore, for trucks where the space behind the cab is already occupied by a crane or other specialized equipment, side-mounted tanks are the only viable fuel storage solution.
Answer : The cylindrical structure offers superior wave resistance and defoaming performance . During vehicle movement, sudden braking, or cornering, the cylindrical, curved outer wall, in conjunction with the built-in anti-surge baffles, naturally and smoothly guides the oil flow along the curved surface, reducing severe impacts at dead angles . This not only significantly reduces eddies in the returning oil within the reservoir and accelerates oil-gas separation (defoaming), but also substantially reduces overall resonance and noise during hydraulic system operation.
Answer : This is a highly practical advanced configuration . Oil temperature control is crucial for hydraulic systems during prolonged continuous heavy-duty operation (such as unloading from a moving undercarriage). The driver or maintenance personnel can simultaneously read the remaining oil level and real-time system oil temperature from the side of the vehicle without opening the cover . If the oil temperature approaches the system's limit (typically 60℃–80℃), the machine can be stopped immediately for inspection to prevent overheating and damage to system seals.
Answer : The industry standard dimensions for this fuel tank are typically 24 inches in diameter × 27 inches in length (approximately 610mm × 686mm) . During actual installation, considering the bending radius of the J-bracket on the chassis beam and the connecting pipes for the high-pressure fuel lines and return hoses at both ends, your truck chassis beam must allow at least 32 to 35 inches (approximately 810mm - 890mm) of clearance on the sides, and this clearance must be avoided from high-temperature heat sources such as exhaust pipes.
Answer : Rubber liners serve two key industrial protective functions :
To prevent vibration and friction cracking : Aluminum has lower fatigue strength than carbon steel. Rubber pads can effectively buffer the strong bumps and local stress concentrations when the truck is driving, and prevent the fastening straps from directly chafing or wearing through the aluminum box.
Preventing Electrochemical Corrosion (Dissimilar Metal Contact) : When the aluminum alloy tank body comes into direct contact with the steel beams or stainless steel strips in a humid, salt spray environment, severe electrochemical corrosion can occur. The rubber gasket provides physical insulation, ensuring the fuel tank remains corrosion-free for a long time.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
Tanks are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the tank does not contain hazardous materials.
Factory Testing: Every tanks is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
