 |
HWX 10000
cissoko
| Quantity: | |
|---|---|
The Runva HWX 10000 is an industrial-spec, heavy-duty hydraulic recovery winch engineered for light-to-medium flatbed tow trucks, tilt-tray car carriers, utility trailers, and full-size 4x4 recovery vehicles. Positioned as a core single-speed configuration within Runva's efficiency-focused HWX Series, this model trades electrical complexity for brute hydraulic fluid torque. By bypassing the battery power drops and overheating vulnerabilities of traditional electric winches, it delivers a massive 10,000 lbs (4,536 kg) of raw crawling force with an exceptionally high duty cycle for demanding, long-duration commercial extractions.
Low-Flow Mechanical Optimization: Engineered around a low-oil-flow motor footprint, it runs successfully on light hydraulic loops without demanding bulky, high-displacement auxiliary pump installations.
Infinite Heavy Duty Cycle: Unlike traditional electric winches that face battery drop limits or trigger thermal shutdowns, its hydraulic motor functions continuously under peak loads, allowing for hours of uninterrupted towing operations.
Industrial Automatic Screw Cone Brake: Equipped with an automatic screw cone braking mechanism. The assembly sits outside the core line path and applies friction-locking pressure that mechanically intensifies as pulling tension increases, ensuring zero slip or vehicle rollback mid-ramp.
Uncompromised Submersible Durability: Lacking an electric motor means there are no copper windings, carbon brushes, or delicate solenoids to short out. The fully enclosed, high-pressure hydraulic circuit stops water, mud bogs, and sand contamination, ensuring flawless operation while completely submerged underwater.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 10,000 lb (4,536 kg) |
| Hydraulic Motor Displacement | 65 ml/rev |
| Oil Flow Range | 5–45 L/min |
| Working Pressure | 10 MPa |
| Gear Reduction Ratio | 28:1 |
| Wire Rope Size (Diameter × Length) | Ø3/8 in × 85.3 ft (Ø9.2 mm × 26 m) |
| Drum Size (Diameter × Length) | Ø2.48 in × 8.45 in (Ø63 mm × 217 mm) |
| Mounting Bolt Pattern | 10 in × 4.5 in (254 mm × 114.3 mm), 4 × M12 |
| Net Weight | 91.0 lb (41.3 kg) |
Applications
Service Truck Lifting : Mounts directly onto custom davit cranes or articulating crane arms on field service mechanics' trucks to lift heavy engine blocks, transmissions, and industrial pumps.
Tool and Equipment Loading : Installed on utility truck beds to effortlessly hoist heavy weld packs, gas cylinders, and tooling boxes from the ground up onto the vehicle platform.
Overhead Gantry Systems : Affixes to overhead I-beam trolleys or fixed gantry frames to hoist heavy machinery parts, steel fabrications, and raw materials over assembly lines.
Vehicle Maintenance Lifting : Utilized in automotive or heavy equipment workshops to suspend or precisely position unyielding sub-frames and assemblies during repairs.
Watercraft Hoisting : Integrated into dockside davits or small marina cranes to vertically lift jet skis, tender boats, and outboard motors out of the water for dry storage or servicing.
Marine Cargo Handling : Handles loading and unloading operations on utility vessels and cargo docks where a fully sealed, weather-resistant hoisting unit is required.
Heavy Farm Rigging : Mounts inside barns or specialized tractor attachments to safely suspend heavy farm implements, cutter decks, or tractor components for routine blade sharpening or structural maintenance.
Game and Timber Processing : Used on rural work yards to lift large timber logs onto processing benches or hoist large game carcasses onto cleaning racks.
HWX 10000 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer: It is custom-tailored for light-duty flatbed tow trucks, tilt-tray car carriers, utility trailers, log splitters, and recreational touring 4x4s. It provides commercial-grade hydraulic muscle without requiring the massive mounting space of oversized industrial truck winches.
Answer: While it can plumb into some factory steering grids via specialized bypass valve loops, Runva heavily discourages using a standard power steering pump for heavy multi-ton recoveries. Light-truck steering pumps generally lack the oil flow volume required to sustain optimal pulling speeds under load. Sourcing a dedicated high-flow pump or a PTO system is recommended.
Answer: It delivers a highly stable, uniform crawling speed that remains completely constant under maximum resistance. While some electric winches may reel faster when completely unweighted, they slow down drastically and lose power as they heat up, whereas the hydraulic winch maintains full power and consistent speed indefinitely.
Answer: Yes, the HWX 10000 is deliberately designed as a highly compact hydraulic option. It is compact and light enough to fit inside most standard 4x4 winch bars and bull bars without structural bumper cutting. Because its overall frame size is tightly packaged, it fits easily into standard narrow bumper cavities.
Answer: Yes, it is exceptionally safe for synthetic Dyneema lines because hydraulic winches generate zero internal drum friction heat compared to electric units (which have internal brake shoes that melt synthetic fibers). If you make this upgrade, remember to replace the factory steel roller fairlead with a smooth aluminum hawse fairlead to prevent rope fraying.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
HWX 10000 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
