 |
HWX10000III
cissoko
| Quantity: | |
|---|---|
The Runva HWX 10000III is an industrial-spec, heavy-duty two-speed hydraulic recovery winch meticulously engineered for commercial flatbed tow trucks, multi-car salvage trailers, heavy utility rigs, and modified full-size 4x4 overland vehicles. The designation "III" represents Runva's third-generation advanced hydraulic transmission infrastructure. Pairing a low-flow high-pressure hydraulic motor with a reinforced full-steel gear reducer, this robust system provides a 100% continuous duty cycle that outputs 10,000 lbs (4,536 kg) of raw crawling torque, completely bypassing the battery drain and thermal shutdown limitations of traditional electric winches.
Patented Two-Speed Mechanical Shifting: Features a physical two-speed transmission inside a compact layout. Engage High Gear (6:1) to rapidly reel in unweighted lines to save valuable time on the job site, then shift to Low Gear (28:1) to maximize the raw crawling torque of the steel planetary gears during severe, high-resistance recoveries.
Infinite 100% Commercial Duty Cycle: Runs entirely on vehicle fluid dynamics instead of electrical grids, meaning it will never overheat, face battery drop limits, or trigger thermal shutdown. Operators can continuously pull heavy loads back-to-back all day long without cool-down breaks.
Industrial Automatic Screw Cone Brake: Equipped with an automatic screw cone braking mechanism. The assembly sits outside the core line path and applies friction-locking pressure that mechanically intensifies as tension increases, ensuring zero slip or vehicle rollback even under vertical suspension.
All-Weather Waterproof Durability: Lacking an electric motor means there are no copper windings, carbon brushes, or delicate solenoids to short out. The fully enclosed, high-pressure hydraulic circuit stops water, mud bogs, and sand silt contamination, ensuring flawless operation while completely submerged underwater.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 10,000 lb (4,536 kg) |
| Hydraulic Motor Displacement | 80 ml/rev |
| Oil Flow Range | 5–60 L/min |
| Working Pressure | 11.5 MPa |
| Brake Type | Automatic Screw-Cone Brake |
| Geartrain | 2-Stage Planetary Alloy Gear |
| Gear Reduction Ratio | 23:1 |
| Waterproof Rating | IP54 |
| Wire Rope Size (Diameter × Length) | Ø13/32 in × 65.5 ft (Ø10.2 mm × 20 m) |
| Drum Size (Diameter × Length) | Ø3.5 in × 7.6 in (Ø88 mm × 193 mm) |
| Mounting Dimensions / Bolt Pattern | 11.8 in × 15.2 in × 11.0 in (300 mm × 385 mm × 280 mm), 8 × M12 |
| Net Weight | 105.8 lb (48 kg) |
Applications
Service Truck Lifting : Mounts directly onto custom davit cranes or articulating crane arms on field service mechanics' trucks to lift heavy engine blocks, transmissions, and industrial pumps.
Tool and Equipment Loading : Installed on utility truck beds to effortlessly hoist heavy weld packs, gas cylinders, and tooling boxes from the ground up onto the vehicle platform.
Overhead Gantry Systems : Affixes to overhead I-beam trolleys or fixed gantry frames to hoist heavy machinery parts, steel fabrications, and raw materials over assembly lines.
Vehicle Maintenance Lifting : Utilized in automotive or heavy equipment workshops to suspend or precisely position unyielding sub-frames and assemblies during repairs.
Watercraft Hoisting : Integrated into dockside davits or small marina cranes to vertically lift jet skis, tender boats, and outboard motors out of the water for dry storage or servicing.
Marine Cargo Handling : Handles loading and unloading operations on utility vessels and cargo docks where a fully sealed, weather-resistant hoisting unit is required.
Heavy Farm Rigging : Mounts inside barns or specialized tractor attachments to safely suspend heavy farm implements, cutter decks, or tractor components for routine blade sharpening or structural maintenance.
Game and Timber Processing : Used on rural work yards to lift large timber logs onto processing benches or hoist large game carcasses onto cleaning racks.
HWX10000III winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : It is designed specifically for heavy commercial flatbed recovery tow trucks, tilt-tray car carriers, agricultural machinery transport, tractors, and extra-heavy armored overlanding trucks . Its 15,000 lbs ratings handles extreme vehicle deadweight where lightweight consumer winches would fail or overheat.
Answer : No. Unlike lighter hydraulic models, an industrial 15,000 lbs winch requires a high oil flow up to 60 L/min and maximum pressures up to 15 MPa. Standard consumer light-truck power steering grids cannot provide this volume. It must be plumbed into a dedicated PTO (Power Take-Off) system or an auxiliary high-output commercial pump loop.
Answer : It delivers a highly stable, uniform crawling speed that remains completely constant under maximum resistance. While some electric winches may reel faster when completely unweighted, they slow down drastically and lose power as they heat up, whereas the hydraulic winch maintains full power and consistent speed indefinitely .
Answer : While it shares the industry-standard 10.0" x 4.5" bolt footprint, it is a massive industrial winch weighing significantly more than standard consumer units. Most standard consumer light-truck bull bars cannot physically accommodate the oversized motor depth and external hydraulic hose fittings. A dedicated heavy commercial bumper bar or reinforced trailer chassis mount is required.
Answer : Yes, it is exceptionally safe for synthetic Dyneema lines . Standard electric winches have internal brake shoes that generate immense friction heat inside the drum, which can melt synthetic fibers during long pulls. Since hydraulic winches rely on fluid braking outside the drum core, the cylinder stays completely cool. Just remember to replace the steel roller fairlead with a smooth aluminum hawse fairlead to prevent rope fraying.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
HWX10000III winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
