 |
EH 2600
cissoko
| Quantity: | |
|---|---|
The Runva EH 2000 Premiumis acommercial-grade, heavy-duty electric hoist and lifting winch engineered specifically for overhead crane setups, workshop lifting mechanics, and custom utility truck cranes. Stepping up significantly in power from the EH 1100, this flagship hoist features a no-clutch safety design and an advanced gearbox ratchet brake to provide absolute load-holding security while lifting heavy materials vertically.
Failsafe No-Clutch Architecture : Intentionally designed without a manual free-spool clutch handle
This eliminates the risk of an operator accidentally disengaging the gear train mid-lift, which would cause a suspended 2,600 lbs load to drop instantly.
Industrial Dual Braking System : Combines an automatic screw cone brake with a mechanical ratchet-pawl layout
The dual-acting assembly friction-locks tighter as load tension increases, holding suspended assets permanently in place with zero creep when power cuts.
Extreme Mechanical Reduction : The massive 370:1 gear ratio delivers immense low-end torque .
This lets the high-horsepower motors lift heavy machinery, industrial components, and engines smoothly without stuttering or bogging down.
Agile Control Methods : Compatible with heavy-duty wired pendant remotes as well as wireless transmitter packages, allowing operators to oversee critical overhead lifting tasks from a safe structural clearance distance.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 2,600 lb (1,180 kg) |
| Motor Type | Permanent-Magnet Motor |
| 12 V Motor Rating | Input: 5.5 kW / 7.4 HP; Output: 2.9 kW / 3.9 HP |
| 24 V Motor Rating | Input: 6.1 kW / 8.2 HP; Output: 3.1 kW / 4.2 HP |
| Brake | Automatic Screw-Cone / Ratchet-Pawl Brake |
| Gear Reduction Ratio | 370:1 |
| Cable Size (Diameter × Length) | Ø15/64 in × 47.6 ft (Ø6.0 mm × 14.5 m) |
| Optional Cable | 19 × 7 Non-Rotating Wire Rope |
| Drum Size (Diameter × Length) | Ø4.7 in × 5.1 in (Ø120 mm × 130 mm) |
| Mounting Bolt Pattern | 6.75 in × 4.5 in (171.4 mm × 114.3 mm) / 6.75 in × 6.5 in (171.4 mm × 165.1 mm) |
| Net Weight | 122.4 lb (55.5 kg) |
Applications
Service Truck Lifting : Mounts directly onto custom davit cranes or articulating crane arms on field service mechanics' trucks to lift heavy engine blocks, transmissions, and industrial pumps.
Tool and Equipment Loading : Installed on utility truck beds to effortlessly hoist heavy weld packs, gas cylinders, and tooling boxes from the ground up onto the vehicle platform.
Overhead Gantry Systems : Affixes to overhead I-beam trolleys or fixed gantry frames to hoist heavy machinery parts, steel fabrications, and raw materials over assembly lines.
Vehicle Maintenance Lifting : Utilized in automotive or heavy equipment workshops to suspend or precisely position unyielding sub-frames and assemblies during repairs.
Watercraft Hoisting : Integrated into dockside davits or small marina cranes to vertically lift jet skis, tender boats, and outboard motors out of the water for dry storage or servicing.
Marine Cargo Handling : Handles loading and unloading operations on utility vessels and cargo docks where a fully sealed, weather-resistant hoisting unit is required.
Heavy Farm Rigging : Mounts inside barns or specialized tractor attachments to safely suspend heavy farm implements, cutter decks, or tractor components for routine blade sharpening or structural maintenance.
Game and Timber Processing : Used on rural work yards to lift large timber logs onto processing benches or hoist large game carcasses onto cleaning racks.
EH 2600 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : The deliberate, slower line speed is a safety and power feature driven by the deep 370:1 gear reduction ratio [https://www.bobshop.co.za/runva-12-volt-electric-hoist-2600-lbs-1180-kg/p/679949180]. In vertical lifting applications, controlled precision is prioritized over speed to prevent violent load swinging and ensure the motor has massive mechanical leverage.
Answer : No. Because this unit is engineered for vertical overhead hoisting, it does not feature a free-spool clutch lever [https://www.runvawinch.com.au/runva-eh2000-premium-12v-with-steel-cable-lifting]. To spool line out, you must safely power the motor in reverse using your handheld remote control.
Answer : No. The maximum 2,600 lbs (1,180 kg) capacity applies strictly to the first layer of cable coiling directly around the bare metal drum cylinder [https://www.runva.com/product/eh-2600/]. As the line stacks up into secondary and tertiary layers, the effective drum diameter increases, which naturally decreases the mechanical lifting leverage.
Answer : Given the high input rating ( 5.5 kW / 7.4 HP ), the 12V motor pulls significant electrical current under max-capacity vertical pulls [https://www.runva.com/product/eh-2600/]. You must connect it using heavy-duty gauge wiring to a robust deep-cycle battery and always keep the vehicle's engine running to avoid stalling the charging loop.
Answer : For industrial vertical lifting, you should always maintain the factory-standard aircraft-grade steel cable [https://www.bobshop.co.za/runva-12-volt-electric-hoist-2600-lbs-1180-kg/p/679949180]. Synthetic ropes are highly susceptible to severe pinching, binding, or getting crushed under immense unyielding overhead weights inside a compact hoist drum, presenting a serious line snapping hazard.
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
EH 2600 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
