 |
EWX 9500
cissoko
| Quantity: | |
|---|---|
The Runva EWN 20000 is an industrial-strength, ultra-high-capacity electric winch engineered specifically for heavy-duty commercial tow trucks, military transport vehicles, massive expedition trucks, and heavy industrial machinery. Representing the pinnacle of pulling force in Runva’s electric lineup, this massive recovery unit delivers an incredible 20,000 lbs of single-line pulling capacity, trading speed for pure, unyielding mechanical torque to move the heaviest assets under extreme conditions.
Patented Gearbox Reliability: Built with an all-steel 3-stage planetary transmission that drastically minimizes internal mechanical friction, preventing gear teeth from stripping or deforming during sudden tension spikes on the trail.
Industrial Screw Cone Brake: Instead of standard internal spring-loaded brake pads that can degrade or slip under high stress, the automatic screw cone brake physically locks tighter as load resistance increases.
Failsafe Sliding Ring Clutch: The internal splines physically slide and lock together when engaged. This eliminates the risk of the clutch shifting or popping out of gear mid-pull, ensuring constant load control.
Dual-Voltage Versatility: Available in 12V or 24V configurations, making it fully compatible with full-size recreational 4WD vehicles or dual-battery systems found on commercial flatbed tow trucks and agricultural machinery.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 9,500 lb (4,309 kg) |
| Motor Type | Series-Wound Motor |
| 12 V Motor Rating | Input: 4.6 kW / 6.1 HP; Output: 2.1 kW / 2.8 HP |
| 24 V Motor Rating | Input: 6.5 kW / 8.7 HP; Output: 2.8 kW / 3.8 HP |
| Brake | Automatic Screw-Cone Brake |
| Geartrain | 3-Stage Planetary Steel Gear |
| Gear Reduction Ratio | 230:1 |
| Clutch | Sliding Geared-Ring Clutch |
| Cable Size (Diameter × Length) | Ø3/8 in × 85 ft (Ø9.2 mm × 26 m) |
| Drum Size (Diameter × Length) | Ø2.48 in × 8.8 in (Ø63 mm × 223 mm) |
| Mounting Bolt Pattern | 10 in × 4.5 in (254 mm × 114.3 mm), 4 × M10 |
| Net Weight | 80.7 lb (36.6 kg) |
Applications
1. Full-Size 4x4 Off-Road Touring & Self-Recovery
Extreme Terrain Extraction: Pulls full-size four-wheel-drive vehicles, overland rigs, and heavily laden touring wagons out of deep mud bogs, thick sand dunes, clay tracks, and rock ruts.
Steep Incline Navigation: Assists mid-to-large 4WDs in ascending or descending near-vertical rocky slopes and mountain trails safely by acting as a mechanical anchor control.
Lightning-Fast Stage Recovery: Used heavily by professional off-road competition crews who choose the low-ratio EWB9500-Q variant for near-instant winch recoveries to minimize time lost during timed race stages.
Continuous Heavy Load Pulls: Engineered specifically for high-frequency winching environments where typical recreational winches overheat or melt synthetic lines.
Flatbed Vehicle Hauling: Mounts onto heavy-duty car carrier trailers and commercial tow truck beds to pull non-running passenger cars, luxury SUVs, and light commercial vehicles up steep loading ramps.
Industrial Site Dragging: Assists construction and utility crews in dragging heavy industrial equipment, concrete molds, or malfunctioning machinery into position on workspace lots.
Tree and Stump Clearing: Utilized on rural properties and farms to pull down hazardous trees, pull stubborn tree roots out of fields, or drag large fallen logs off roads.
Stranded Equipment Rescue: Rescues bogged farm machinery, small utility tractors, or livestock transport trailers stuck in rain-soaked paddocks.
EWX 9500 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer: It is ideally sized for mid-to-large 4x4 vehicles, dual-cab utility pickups (e.g., Toyota Hilux, Ford Ranger), and mid-sized SUVs. Its 9,500 lbs capacity easily hits the recommended industry benchmark of being at least 1.5 to 2 times the Gross Vehicle Mass (GVM) of modern overland trucks.
Answer: Yes. It utilizes the standard 10.0" x 4.5" (254mm x 114.3mm) mounting bolt pattern, matching the pre-drilled plates of most universal bull bars. Because its overall frame size is relatively compact, it fits easily into standard bumper cavities.
Answer: At full capacity, the 12V motor draws a heavy 340+ Amps. To prevent severe voltage drops and protect the internal solenoids, it is highly recommended to run this winch with a heavy-duty battery rated for at least 750+ CCA or a dual-battery setup. Always keep your engine idling to maintain stable charging voltage.
Answer: Yes. While standard base packages feature a heavy-duty waterproof wired handheld controller, the integrated control pack architecture is fully wireless remote control compatible. You can easily integrate an aftermarket Runva wireless receiver kit into the circuit.
Answer: Yes, the drum handles synthetic rope upgrades perfectly. However, because the internal screw cone brake transfers friction heat to the drum during extended pulls, you must ensure the new synthetic rope has a high-heat resistant protection sleeve on its first layer and replace the steel roller fairlead with a smooth aluminum hawse fairlead.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
EWX 9500 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
