 |
HWE 200
cissoko
| Quantity: | |
|---|---|
Runva HWE 200 isAn industrial-grade, heavy-duty, two-way hydraulic self-rescue and lifting winch , specifically developed for truck-mounted cranes, emergency rescue vehicles, truck-mounted cranes, ship and dock lifting operations, and heavy-duty flatbed recovery vehicles.As a core member of the Runva professional hydraulic winch/hoot family, it strictly complies with heavy-duty lifting engineering safety standards. It completely eliminates the clutch mechanism of traditional winches, focusing on dual safety protection for vertical overhead lifting and heavy-duty traction . Powered directly by the vehicle's PTO system or an independent auxiliary hydraulic pump, it achieves 100% unlimited working cycles through stable fluid power, completely eliminating the fatal shortcomings of electric cranes, such as motor overheating and battery depletion, that are common in long-distance, high-frequency lifting operations.
Certified vertical suspension lifting safety : Ordinary off-road self-rescue winches on the market can only pull vehicles horizontally. If used to lift heavy objects vertically, their dynamic brakes will slip due to the inability to withstand gravity, causing the heavy object to fall. The HWE 200 comes with a high-pressure hydraulic wet multi-disc brake and a forced-connection balance valve. Once the handle is released, the heavy object can achieve absolute zero slippage and zero roll-off in mid-air .
Zero-misoperation clutchless design : This model has no manual clutch lever, and the rollers cannot enter a free-sliding state. This is a mandatory industrial safety design that can completely prevent catastrophic accidents caused by operators accidentally touching or accidentally engaging the clutch when suspending a 2-ton load in mid-air, resulting in the load falling freely and crashing.
Unlimited 100% industrial-grade work cycle : It is completely independent of electrical components or vehicle batteries. The hydraulic oil circulation provides excellent heat dissipation, ensuring no overheating, no thermal decay, and no energy loss . As long as the truck engine is running, the operator can operate the hoist continuously at full load for an entire day without needing to stop for cooling.
Fully sealed to protect against harsh environments : With no carbon brushes, coils, or electronic control boxes inside, it is completely unaffected by rain, water ingress, or mud. The entire machine meets IP67 high-pressure sealing standards, allowing it to work perfectly even in heavy rain at construction sites, in extremely cold snow, or on muddy dock decks, resulting in an exceptionally long mechanical lifespan.
| Parameter | Specification / Value |
|---|---|
| Rated Line Pull | 44,000 lb (20,000 kg) |
| Hydraulic Motor Displacement | 315 mL/rev |
| Oil Flow Range | 10–120 L/min |
| Working Pressure | 20 MPa |
| Brake Type | Wet-Type Hydraulic Brake |
| Geartrain | 2-Stage Planetary Alloy Gear |
| Gear Reduction Ratio | 36:1 |
| Waterproof Rating | IP67 |
| Wire Rope Size (Diameter × Length) | Ø1.02 in × 131 ft (Ø26 mm × 40 m) |
| Drum Size (Diameter × Length) | Ø8.27 in × 13.39 in (Ø210 mm × 340 mm) |
| Mounting Dimensions / Bolt Pattern | 20.94 in × 6.3 in × 11.02 in (532 mm × 160 mm × 280 mm), 8 × M24 |
| Net Weight | 380 kg |
Applications
Service Truck Lifting : Mounts directly onto custom davit cranes or articulating crane arms on field service mechanics' trucks to lift heavy engine blocks, transmissions, and industrial pumps.
Tool and Equipment Loading : Installed on utility truck beds to effortlessly hoist heavy weld packs, gas cylinders, and tooling boxes from the ground up onto the vehicle platform.
Overhead Gantry Systems : Affixes to overhead I-beam trolleys or fixed gantry frames to hoist heavy machinery parts, steel fabrications, and raw materials over assembly lines.
Vehicle Maintenance Lifting : Utilized in automotive or heavy equipment workshops to suspend or precisely position unyielding sub-frames and assemblies during repairs.
Watercraft Hoisting : Integrated into dockside davits or small marina cranes to vertically lift jet skis, tender boats, and outboard motors out of the water for dry storage or servicing.
Marine Cargo Handling : Handles loading and unloading operations on utility vessels and cargo docks where a fully sealed, weather-resistant hoisting unit is required.
Heavy Farm Rigging : Mounts inside barns or specialized tractor attachments to safely suspend heavy farm implements, cutter decks, or tractor components for routine blade sharpening or structural maintenance.
Game and Timber Processing : Used on rural work yards to lift large timber logs onto processing benches or hoist large game carcasses onto cleaning racks.
HWE 300 winch are typically packaged securely to prevent damage during transit. The packaging includes:
Protective Wrapping: To safeguard the pump from environmental damage.
Custom Crates: For larger, heavier pumps, ensuring safe handling.
Documentation: Includes installation, maintenance instructions, and warranty details.
Delivery time depends on the model, customizations, and location but typically ranges from 2 to 6 weeks from the order date.
Answer : It is best suited for mounting on the booms of light and medium-sized flatbed truck-mounted cranes, road construction and rescue vehicles, truck-mounted cranes, marine jibs, dockside small cranes, and lifting and hoisting frames for special construction goods. It is specifically designed for rigid scenarios that require "safely suspending or precisely moving heavy objects in the air".
Answer : Absolutely not. This industrial-grade lifting hydraulic motor requires a stable oil flow of 30 to 55 liters per minute and a system pressure of up to 16 MPa to operate. The original pickup truck's power steering pump has extremely low flow and pressure; forcing it to connect would cause the winch to lock completely and become inoperable. A dedicated PTO (Power Take-Off) shaft drive pump or a separate auxiliary high-flow hydraulic pump system must be installed.
Answer : Because the physical calculation methods for "lifting standards" and "horizontal towing standards" are completely different. A winch for pulling a "wheeled, rolling vehicle" on the ground overcomes a tiny amount of rolling friction. The HWE 200's nominal 2-ton capacity, however, refers to directly overcoming Earth's gravity to vertically lift a 2-ton solid iron object from the ground and suspend it in the air—an extremely stringent rigid safety standard for industrial cranes.
Answer : You must use your hydraulic multi-way directional valve control handle (or remote control) to press and hold the lower button, causing the hydraulic motor to rotate in the opposite direction to "powerfully release the rope." Although this method doesn't allow for a direct and rapid pull like manual rope pulling, it guarantees 100% that there will be no accidental slippage during high-altitude hoisting.
Answer : For vertical lifting operations, Runhua strongly recommends that you retain the original high-rigidity aviation steel wire rope. Although the drum of the hydraulic winch is cool and does not scald the rope when it is running, when the nylon rope is vertically supported by a lifting weight of two tons, there will be extremely strong mutual stacking and compression inside the compact drum, which can cause the rope to jam or even be cut by its own stress. Using high-rigidity steel wire rope is in line with the safety standards of lifting engineering.
6. Do you provide OEM or customized services
Yes, we support OEM and customization, including nameplate, packaging, and specific performance requirements. Send us your drawings or specifications for evaluation.
HWE 200 winch are manufactured in compliance with international standards, ensuring high performance and reliability:
ISO 9001: Certified for quality management systems.
CE Certification: Ensures compliance with European safety, health, and environmental protection standards.
RoHS Compliance: Ensures the winch does not contain hazardous materials.
Factory Testing: Every winch is rigorously tested for performance, pressure, and leak integrity before shipping.
1.What's our advantages?
Factory established in 2005;
With a great deal of production experience;
80+ employees become the professional team;
Constant updated ERP system ensure efficiency of work;
Sophisticated equipment ehanced the accuracy of products;
Professional salesmen provide the greast service;
With a large number of famous customers all over the world;
Great after-sales service;
With the long term cooperation with famous logistics and express company in China,provide the better goods service.
Small order/sample order,full payment in advance; Big orders send the first payment 30% before the production,and the balance before shippment.We'll show the photos of the products and packages before delivery.
Of course we can. Just send me your logo we can make it for you.
America(40.5%):USA, Canada, Argentina, Brazil
Europe(30.8%):Italy,Germany,England,Holland,Spain,Swiss,Finland,Russia,Poland.
Asia(23.5%):Korea,singapore,India,Turkey,Vietnam,Saudi Arabia,Syria, Israel,Lebanon.
Others(5.8%).
The Cissoko hydraulic pump manufacturing facility is a specialized industrial plant that focuses on producing hydraulic pumps and related components. These factories are equipped with advanced machinery and technology to fabricate high-quality pumps designed for a wide range of applications, from heavy equipment and machinery to automotive and industrial systems.
The production process typically involves precision engineering, where raw materials like metals and alloys are processed into pump components such as gears, pistons, cylinders, and seals. These parts are then assembled into fully functional hydraulic pumps, which are tested for performance and quality control to ensure reliability, efficiency, and durability under various working conditions.
Cissoko Hydraulic's manufacturing facilities for hydraulic pumps maintain stringent quality standards, often adhering to international certifications, to meet the expectations of customers in industries such as construction, agriculture, automotive, and manufacturing.
All hydraulic pumps produced by Cissoko Hydraulic have undergone compliance testing, ensuring their quality and reliability.
To meet the diverse needs of different industries, the Cissoko hydraulic offer customization options, such as specialized seals, materials, and pump configurations. These facilities often work closely with engineering teams to develop tailored solutions for specific applications, from high-pressure systems to low-flow, high-efficiency pumps.
Each pump undergoes a rigorous quality control process, where pressure tests and performance assessments are conducted to ensure that the pumps meet the required standards for flow rate, pressure capacity, and durability.
